Comments on: Etherchannel Router Interfaces http://www.xpresslearn.com/cisco/general/etherchannel-router-interfaces Solutions to your Networking and Security questions Thu, 12 Jan 2012 22:04:22 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Mark http://www.xpresslearn.com/cisco/general/etherchannel-router-interfaces/comment-page-1#comment-60761 Mark Mon, 08 Aug 2011 20:47:06 +0000 http://www.xpresslearn.com/?p=117#comment-60761 In my lab testing with a 3945E to a 3750 stack, i will continually lose 3 ICMP packets when pinging from switch to router. I have tried spanning-tree portfast on the switch side on the reinsertion of the port-channel member. I have looked into port-channel load-balance variations, but still seem to continue loosing 3 packets per transition. Thoughts? In my lab testing with a 3945E to a 3750 stack, i will continually lose 3 ICMP packets when pinging from switch to router. I have tried spanning-tree portfast on the switch side on the reinsertion of the port-channel member. I have looked into port-channel load-balance variations, but still seem to continue loosing 3 packets per transition. Thoughts?

]]> By: Sinade http://www.xpresslearn.com/cisco/general/etherchannel-router-interfaces/comment-page-1#comment-54890 Sinade Tue, 12 Jul 2011 10:48:39 +0000 http://www.xpresslearn.com/?p=117#comment-54890 Is not possible to have the bundled interfaces configured this way? int range fa0/1 - 2 no shut ! channel-group 1 mode on ! int port-channel1 switchport switchport access vlan 10 switchport mode access no shut ! Is not possible to have the bundled interfaces configured this way?

int range fa0/1 – 2
no shut
!
channel-group 1 mode on
!
int port-channel1
switchport
switchport access vlan 10
switchport mode access
no shut
!

]]> By: durga prasad narni http://www.xpresslearn.com/cisco/general/etherchannel-router-interfaces/comment-page-1#comment-39961 durga prasad narni Tue, 19 Apr 2011 07:46:46 +0000 http://www.xpresslearn.com/?p=117#comment-39961 Excellent..if you don't mind, leave me website or any URL to understand more about etherchannel easily and mostly when configuring on cisco router ports not switch ports .. How to configure etherchannel on 3745 router as they can not be switch ports ..? Excellent..if you don’t mind, leave me website or any URL to understand more about etherchannel easily and mostly when configuring on cisco router ports not switch ports ..

How to configure etherchannel on 3745 router as they can not be switch ports ..?

]]>