Comments on: Configure a Basic MPLS Network II

By: Ajay

Ajay — Sun, 08 Jan 2012 07:20:43 +0000

I need to know why be start configure MPLS on PE…why we not configure start from CE router.

By: deni yulianti

deni yulianti — Sun, 20 Mar 2011 02:41:59 +0000

Dear ALL,

My name is Deni Yulianti, 23 years old and I’m doing my final project right now about flow control MPLS on GNS3…

i’ve problem about IOS, actually i’ve laptop with specification processor Intel Centrino Duo, 80GB hardisk and 3GB Memory RAM..

can you suggest me IOS for MPLS Router on GNS3 that needed lower RAM sir??

as i know c7200-adventerprisek9-mz.124-4.T1.bin is appropriate as MPLS router but need hgh CPU and RAM,,, in this final project, i’ll run 14 routers sir..

now, i use c7200-adventerprisek9-mz.124-4.T1.bin as my IOS but i edited ram for each router from 256MB to 128MB…

i’m afraid if i edit my memory RAM can effect with router and even it can’t run as MPLS router sir…

i’m really need your help sir…

thank you so much for your attention and i hope your reply…

my email is dencar_girl87@yahoo.com

Sincerelly Yours,

Deni Yulianti

By: praveen

praveen — Wed, 28 Jul 2010 23:08:54 +0000

I have configured a simple MPLS network ..i got 3 router with ISP router and im using EIGRP in between ISP and i got 2 router with customer end used BGP to connect ISP network …when i am trying to trace route from cstomeer end MPLS label getting exited from the middle router which is in the ISP network …i am getting only one route with mpls labet ..wht could be the problem ? pls help

By: Paul

Paul — Mon, 19 Jul 2010 07:58:37 +0000

Hi!

I’m also looking forward for the third post of the series. You explain very good the configuration of mpls. Thanky you very much,
Paul from Hungary

By: petecory

petecory — Fri, 02 Jul 2010 15:13:20 +0000

Sounds good! Thanks Scott!

By: Xpresslearn Administrator

Xpresslearn Administrator — Fri, 02 Jul 2010 03:22:34 +0000

I’m actually working on it now, I hope to be finished up with it no later than the weekend. Thanks for asking!

Scott

By: petecory

petecory — Fri, 02 Jul 2010 00:23:46 +0000

Do you have the third post in this series?? I have been following it so far and it has been very good.

Thank you!